Reply To: Right (or left) full ailerons having wind components

[adipinto]

Hi Diego,
thank you very much for your support! The trick with the debug window is pretty cool actually 🙂

When the yoke is “un-calibrated” I do not need so much force to pull it to the center position. It has a bit of resistance but you can move it with a finger. When you leave it free, it returns back to the wrong position automatically.

I’ve attached the requested screenshot taken after landing. Please note that this time the yoke was full end to the left after the flight. Just as additional info, I attached the weather used during the flight, I remained below 2000ft.

Just to let you know, I noticed that soon after I open the profile window in CLS2Sim (clicking on “Profile manager”), the force on the yoke disappears. If you move the yoke, it remains in the position where you leave it, not returning back to the wrong position. However, it does not return to the center position either; It just remains where it is without opposing any force.

Please let me know if you need more info or screenshot. Glad to help fixing this issue.

Talk soon,
Alessandro

Attachments:

You must be logged in to view attached files.