FORUM Forums Software CLS2SIM Software Yoke won't move when autopilot is engaged in the Zibo mod in XP11 Reply To: Yoke won't move when autopilot is engaged in the Zibo mod in XP11

#1532
webmaximus
Participant

Not really sure why you decided to wake up an almost one year old thread to explain a problem that doesn’t match the topic of the thread and on top of that, in a different aircraft as well.

Anyway, if LNAV disconnects due to yoke movement, I’d say something is wrong with the logic in the aircraft. Which maybe wouldn’t be that far off to think since you’re in the default 737 which isn’t very sophisticated when it comes to systems modeling compared to some other 737s. Such as the excellent (and amazingly free) Zibo 737-800X mod.

That CMD will disengage from yoke movement is normal and realistic. If you by movement mean manual input. If CMD disconnects when the yoke is “slaved” under the AP, that of course should not happen. Again though, I’d say it’s probably a limitation with the default 737. There were similar issues also in the Zibo mod in the past. In the new versions of the Zibo mod, it’s working all fine though. You also have the chance to configure the Zibo mod for using it with Brunner hardware to help the Zibo mod work correctly.

So, my suggestion is you move away from the default 737 to the Zibo mod which will give you a much better and more realistic experience. Both in this regard but also in many others. Plus it will make it possible for you to get more out of your investment in Brunner hardware.

BRUNNER Forum​

In the BRUNNER forum you will find various discussions on different topics, such as setup, software use or general questions and concerns. 

Discuss with forum mebers, share your knowledge and experience or find answers to frequently asked questions that are answered directly by our Brunner team.

Go to BRUNNER Forum.

BRUNNER Helpdesk​

Do you have questions about a product you have already purchased or are you facing technical issues? 

Check our FAQs for quick help. The most common questions or problems are described there, including instructions.

If you are still stuck, please contact our BRUNNER Helpdesk. Open a ticket here.

BRUNNER Simulation​

BRUNNER is a leading manufacturer of flight simulation devices for the professional as well as the enthusiast sector.

Unlike other manufacturers, Brunner offers a realistic flight experience with the help of Force Feedback Technology and Control Loading System.

Discover the BRUNNER Shop.

BRUNNER Simulation

Industriestrasse 27
8335 Hittnau


+41 (0)44 953 10 10
info@brunner-innovation.swiss

© 2023 BRUNNER Elektronik AG | Privacy Policy |  Legal notice