FORUM Forums Products CLS-E Rudder CLS-E Rudder Trim configuration for Airbus aircraft Reply To: CLS-E Rudder Trim configuration for Airbus aircraft

#3750
Samuli
Participant

Pedals are useable, but they work just like any other non-force feedback rudder pedals system. They just don’t synch with Fenix A320, meaning that pedals remain centered in the same position when trimming the rudder (they don’t move).

My aim is to practice engine failures like in the real airplane. So when your engine fails you first need to center the beta target (triangle on top of the PFD) by applying the appropriate amount of rudder deflection, then trim to neutralize the pressure required to keep the beta target centered (if removing your feet from the pedals), and then switch on the autopilot. Once autopilot is ON, rudder pedals should then automatically move according to the trim position, so that when you disconnect the AP the aircraft stays in the trimmed condition.

No, as for the moment I only fly Airbus aircraft (real life airbus pilot) so I don’t need the Brunner yoke (which by the way I have seen in action and seems fantastic as well). My thrustmaster sidestick serves the purpose pretty well right now.

Definitely, if you have the chance to write to Fenix and also to Brunner team once you get your unit and are facing the same issues, I really hope that will help to get both sides to work together to make both pedals and add-on compatible!

BRUNNER Forum​

In the BRUNNER forum you will find various discussions on different topics, such as setup, software use or general questions and concerns. 

Discuss with forum mebers, share your knowledge and experience or find answers to frequently asked questions that are answered directly by our Brunner team.

Go to BRUNNER Forum.

BRUNNER Helpdesk​

Do you have questions about a product you have already purchased or are you facing technical issues? 

Check our FAQs for quick help. The most common questions or problems are described there, including instructions.

If you are still stuck, please contact our BRUNNER Helpdesk. Open a ticket here.

BRUNNER Simulation​

BRUNNER is a leading manufacturer of flight simulation devices for the professional as well as the enthusiast sector.

Unlike other manufacturers, Brunner offers a realistic flight experience with the help of Force Feedback Technology and Control Loading System.

Discover the BRUNNER Shop.

BRUNNER Simulation

Industriestrasse 27
8335 Hittnau


+41 (0)44 953 10 10
info@brunner-innovation.swiss

© 2023 BRUNNER Elektronik AG | Privacy Policy |  Legal notice