FORUM › Forums › Products › CLSE-Yoke › Aileron error

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 30/08/2019 at 08:43 #1396
    jkpau
    Participant

    As i am on the runway ready for Takeoff, everything si ok, aileron And elevator . I feel the FF on the yoke and suddenly alter 10 sec , no force on the yoke, aileron turns to red and the SIM goes to an init (yoke turns left and right !!!

    What is wrong ?

    Thanks.

    John

    30/08/2019 at 08:49 #1397
    sbrunner
    Keymaster

    Hi John
    Please open a ticket and tell us which unit you have
    Also, the log message in CLS2Sim is helpful
    Regards
    Stefan Brunner

    02/09/2019 at 07:52 #1402
    jkpau
    Participant

    Hi Stefan,
    A ticket is open . I posted a log file in it. Hope it will help us to fix this aileron error so I can enjoy it because since I received it, I could not even take off for less then 1 minute !!!
    Regards

    John

    20/10/2019 at 13:56 #1508
    jasontbm
    Participant

    Hello, I have the exact same issue, was it resolved?

    I have attached the log file.

    I have two yokes connected together via the ethernet cable, I have also swapped power supply and usb cable, same issue on the same yoke.

    Thank you

    Attachments:
    You must be logged in to view attached files.
    20/10/2019 at 14:56 #1510
    sbrunner
    Keymaster

    Hi
    Please open a TICKET
    Tell us GER. number behind the unit

    Regards

    Stefan Brunner

    25/10/2019 at 14:04 #1521
    mrscott
    Participant

    Guys,

    Please post an update to this subject so the rest of us can know 1) what the issue is/was, and 2) How it was resolved.

    Thanks,

    Scott

    25/10/2019 at 14:22 #1523
    jasontbm
    Participant

    I updated all 4 notes ( 2 x yokes) with new firmware and have had no issues since. I have tested it twice VFR flying. Still need to calibrate the FF to my liking , hopefully this will not cause any issues.
    Thumbs up for now and thank you for helping me out.
    Jason

    25/10/2019 at 22:01 #1527
    jkpau
    Participant

    Hi, my issue came from the faulty engine, need to be replaced then it was OK.

    John

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.

BRUNNER Forum​

In the BRUNNER forum you will find various discussions on different topics, such as setup, software use or general questions and concerns. 

Discuss with forum mebers, share your knowledge and experience or find answers to frequently asked questions that are answered directly by our Brunner team.

Go to BRUNNER Forum.

BRUNNER Helpdesk​

Do you have questions about a product you have already purchased or are you facing technical issues? 

Check our FAQs for quick help. The most common questions or problems are described there, including instructions.

If you are still stuck, please contact our BRUNNER Helpdesk. Open a ticket here.

BRUNNER Simulation​

BRUNNER is a leading manufacturer of flight simulation devices for the professional as well as the enthusiast sector.

Unlike other manufacturers, Brunner offers a realistic flight experience with the help of Force Feedback Technology and Control Loading System.

Discover the BRUNNER Shop.

BRUNNER Simulation

Industriestrasse 27
8335 Hittnau

+41 (0)44 953 10 10
info@brunner-innovation.swiss
Facebook Instagram Linkedin Youtube

© 2023 BRUNNER Elektronik AG | Privacy Policy |  Legal notice