How to implement this force profile in the software – BRUNNER Innovation

This topic has 3 replies, 2 voices, and was last updated 5 years, 12 months ago by cmbaviator.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
11/11/2018 at 22:09 #978

cmbaviator
Participant

Hi,

I made 3 profiles that give the forces applied on the yoke for the elevator and roll axis for the CLS-E. I considered a range of 0-220 KIAS where peak force (100N/5N.m) are applied at 220 KIAS and forces varie quadraticaly with airspeed

please see attached my curves i would like to set in the software

Attachments:
You must be logged in to view attached files.

13/11/2018 at 08:07 #982

sbrunner
Keymaster

Hi

Which Profile do you need? i see 2 there 124 KIAS / 170 KIAS
You can have only 1 curve active per plane…

Regards

Stefan Brunner

13/11/2018 at 10:35 #983

cmbaviator
Participant

Hi stephan,

I want them both if possible ( 2 distincts profiles, one named TBM900_124, the other one TBM900_170.

I mean, if for a flight I will make a 124 KIAS climb, I will then select the TBM900_124 and vise versa.

My excel only gives the force vs airspeed and i don’t know how to implement the deflection. For me the deflection value is between [0;1]

06/12/2018 at 15:04 #992

cmbaviator
Participant

Up.

Just received my yoke today, would be nice to have the profile though
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

BRUNNER Forum

In the BRUNNER forum you will find various discussions on different topics, such as setup, software use or general questions and concerns.

Discuss with forum mebers, share your knowledge and experience or find answers to frequently asked questions that are answered directly by our Brunner team.

Go to BRUNNER Forum.

BRUNNER Helpdesk

Do you have questions about a product you have already purchased or are you facing technical issues?

Check our FAQs for quick help. The most common questions or problems are described there, including instructions.

If you are still stuck, please contact our BRUNNER Helpdesk. Open a ticket here.

BRUNNER Simulation

BRUNNER is a leading manufacturer of flight simulation devices for the professional as well as the enthusiast sector.

Unlike other manufacturers, Brunner offers a realistic flight experience with the help of Force Feedback Technology and Control Loading System.

Discover the BRUNNER Shop.

BRUNNER Simulation

Industriestrasse 27
8335 Hittnau

+41 (0)44 953 10 10
info@brunner-innovation.swiss

Attachments:

BRUNNER Forum​

BRUNNER Helpdesk​

BRUNNER Simulation​

BRUNNER Simulation

BRUNNER Forum

BRUNNER Helpdesk

BRUNNER Simulation