FORUM Forums Products CLSE-Yoke TBM 900 Pitch change when disengaging AP

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1684
    severniae
    Participant

    Hi,

    CLS-E MKii

    I submitted a support a week ago (!) but haven’t heard anything back from support.

    In the TBM 900 when using the autopilot, there is a big nose down tendancy at high speeds, and nose up at low when disengaging the autopilot. I’ve tried numerous profiles and created one myself – I can lessen the effect but it is still bad.

    I had a similar issue on the quest kodiak, but eliminated it by checking the ‘do not set position in ap mode’ box.
    This doesn’t work in the TBM, in fact it seems that anything I change in autopilot tab doesn’t work for the TBM – for instance I tried to disable autopilot sync entirely but it still keeps working..

    Does anyone have any ideas / advice? If support see this could they take a look at my submitted request please?

    Thanks,
    James

    #1722
    calypteaviation
    Participant

    Hi,

    Had the same problem with A2A’s Cessna. Try setting a different value to “Percent of way used by AP” in the Autopilot tab. Cessna works well with something between 90-93. Those values apply for a linear response – you may need different values if you use non-linear response curve.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

BRUNNER Forum​

In the BRUNNER forum you will find various discussions on different topics, such as setup, software use or general questions and concerns. 

Discuss with forum mebers, share your knowledge and experience or find answers to frequently asked questions that are answered directly by our Brunner team.

Go to BRUNNER Forum.

BRUNNER Helpdesk​

Do you have questions about a product you have already purchased or are you facing technical issues? 

Check our FAQs for quick help. The most common questions or problems are described there, including instructions.

If you are still stuck, please contact our BRUNNER Helpdesk. Open a ticket here.

BRUNNER Simulation​

BRUNNER is a leading manufacturer of flight simulation devices for the professional as well as the enthusiast sector.

Unlike other manufacturers, Brunner offers a realistic flight experience with the help of Force Feedback Technology and Control Loading System.

Discover the BRUNNER Shop.

BRUNNER Simulation

Industriestrasse 27
8335 Hittnau


+41 (0)44 953 10 10
info@brunner-innovation.swiss

© 2023 BRUNNER Elektronik AG | Privacy Policy |  Legal notice