- This topic has 3 replies, 2 voices, and was last updated 6 years, 6 months ago by sbrunner.
-
AuthorPosts
-
17/03/2018 at 12:42 #780angus1113Participant
hi all, I seem to be having a non linear aileron problem with all p3d default aircraft when using my brunner yoke whereas my physical yoke deflection isn’t truly represented in the sim, like if I move yoke for about thirty degrees, in the sim it only moves about 15, then all of sudden it leaps to left/right. This doesn’t happen when I am flying in A2A, PMDG and X plane.
My profile doesn’t enable non linear output, I have also made the stick_sensitivity_mode=0 change to the cfg file but the problem persists. Does anyone know why and how to solve it? thanks in advance19/03/2018 at 08:38 #781sbrunnerKeymasterHi
This is normal in P3d, also happens with USB Yokes
If you want to correct this use “Linearity Settings” in CLS2Sim
https://cls2sim.brunner-innovation.swiss/CLSProfileManager.htm#rangeRegards
Stefan Brunner
19/03/2018 at 16:28 #782angus1113ParticipantI currently have non linear disabled. Do you mean I need to enable it and make my own custom curve to counter the default non scaling effect in p3d?
20/03/2018 at 07:57 #783sbrunnerKeymasterHi
Yes you need to make a custom curve
Regards
Stefan Brunner
-
AuthorPosts
- You must be logged in to reply to this topic.