FORUM › Forums › Products › CLS-E Rudder › Turn Coordinator
- This topic has 2 replies, 2 voices, and was last updated 4 years, 8 months ago by rufus.
-
AuthorPosts
-
10/01/2020 at 13:36 #1643rufusParticipant
I have the CLS-E MK II YOKE and the CLS-E RUDDER with Toe Brakes.
I have a problem and need a little help.When using the CLS-E RUDDER with Toe Brakes the Turn Coordinator When in the air Turn Coordinator is always rolled to the right when in strait and level flight.
As a RWP flying a 172 … i know this is not right.
I have ask for tech support and have not receive it… so why would anyone spend $5,000 with this stuff if you can not get support.
10/01/2020 at 20:37 #1645sbrunnerKeymasterHi
As far as i know we do not control the Turn Coordinator from our Software directly
But you can try following, disconnect the Simulation in CLS2Sim (when you have the effect) and check if you still have the behavior
Regards
Stefan Brunner10/01/2020 at 22:29 #1647rufusParticipantYou are right and i was wrong…
after unplugging the CLS2Sim and plugging-in the old yoke… i have the same problem.
So sorry for the trouble… -
AuthorPosts
- You must be logged in to reply to this topic.