Virpil MongoosT-50CM2 Trigger Question/Problem – BRUNNER Innovation

This topic has 4 replies, 4 voices, and was last updated 2 years, 9 months ago by twitchyrudder.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
08/01/2021 at 04:57 #2239

sierraalphamike
Participant

I have a Virpil MongoosT-50CM2 on a CLS-E base. I have the CM2 selected in CLS2SIM. My question is in regards to the flip down trigger. I thought that the trigger had three virtual button positions (Folded up, folded down, and pressed). Currently, it shows the same button press activation when it is folded up and when it is folded down. Pressing the trigger activates a separate button press.

Is this normal, and if so, is there a way to change it?

03/02/2021 at 03:28 #2311

moespeeds
Participant

I just got a CM2, and same issues, as well as nothing when I depress the hats. I swear I saw that the CM2 was comnpatible?

03/02/2021 at 16:29 #2312

sbrunner
Keymaster

Hi
Open a ticket with your firmware version, we will check with you
Regards
Stefan Brunner

03/02/2021 at 18:18 #2313

moespeeds
Participant

Thank you, I figured it out last night. The issue was that I did not have the CM2 set as my controller type in the individual aircraft profiles. I looked about everywhere for that setting, except where it actually was!

Working great now, thank you!

Every time I open the CLS software, it’s telling me there is a newer version, but does not tell me where to find it. Might be beneficial to have a hotlink pop up so it can be easily found?

27/10/2021 at 10:47 #2582

twitchyrudder
Participant

I have a follow up question regarding the flip down trigger.

At the moment it detects it as a constant button 17 press when it is flipped down. Is there a way to make it so that flip down and flip up being two separate button actions?
Author

Posts