Zibo A/P disconnecting again

[gian19]

Hi,

any Zibo user out there having problems with latest release?
It has been since the latest patches of 3.36 and all 3.37 that I get the A/P disconnects again, especially on approaches when the A/C makes steeper turns and or descents.
The same behavior we had before both Zibo and Brunner found the solution to make the yoke work with the Zibo mod.
Off course, “Use Brunner Hardware” is selected in my Avitab. I noticed that if I disconnect the yoke, from the CLS2 interface, during the approach phases the A/P does not disconnect.

Thanks,
Gianfranco

[Author]

Posts