[chuckk]

Braking problem solved. Updated firmware to latest version.

Chuck

[chuckk]

Help ticket created.

Chuck

[chuckk]

Stefan,

That worked, freezing is gone. Thanks so much. I knew I could taxi a plane better than that! 😉

Any thought on the left brake issue?

Chuck

[chuckk]

Stefan,

I connected the Rudder to the sim via the USB and disconnected the yoke from USB. I have attach a screen shot of the error and it alsoshows the rev of the software as well. The error message repeats continuously every 10 seconds or so.

Chuck

Attachments:

You must be logged in to view attached files.

[chuckk]

Hi Stefan,

Thank you for the quick response. Upon reviewing my hardware and connections, I have the V001 yoke which seems to need to be connected to the PC directly and the pedals connected to the yoke. I did confirm everything is connected in that manner and is does work although still freezing briefly as previously described. What is required to connect the yoke and pedals to the sim via Ethernet? Do I need the E2CAN Gateway product? I tired to connect the yoke to the sim via the LAN instead of the USB connection but it would not connect.

Also I did notice that the left brake analog axis of the pedals is not working. I get no response when doing the calibration, whereas the right brake is working fine. Any insight on that issue would be appreciated as well

Thanks,

Chuck

[Author]

Posts