Forum Replies Created
-
AuthorPosts
-
29/05/2019 at 23:50 #1223ebawParticipant
Hi Derry,
Yes, ticked, otherwise there is no force feedback with winds selected.
Now, I love this yoke, and the turbulence setting gives a great feeling of immersion.
But there are some issues .
This is my personal opinion and experience, and might be different for some one else.
I flew a rectangle test circuit , heading 360/270/180/90 degrees, set the wind 5 knots, with gust up to 20 knots,from 360.
a great difference, to see how the yoke responds.
When the gusts is a one time gust, meaning it goes up to +/- 20 and back to 5
And stays at 5 for let’s say 5 á 10 seconds , then the yoke force only kicks in when the gust is decreasing, when increasing it does not do anything ,
When there are multiple gusts after each other, then the force stays during the duration of these gusts.variating from left to right.
However, not always from the direction I expect.
For instance, banking right from 360 to 90 degrees , and the wind coming from 360, I expect with the left wing being the upwind wing, a gust would lift this wing higher , so the yoke force should move it to the right, and I would feel the force when applying left aileron fighting the wind , sometimes it does, but sometimes it is the opposite, and i feel only the force after the right aileron input to compensate the over reaction .
If I understand it correct the software reads the wind data from( in my case Xplane ) and randomly generates forces.
If this is not the case than someone from Brunner must correct me or delete this answer because it is not positive comment and I do not want to offend anyone.However, if it is correct, then it would be nice that the wind data from the sim could match the yoke software , and the random factor is removed .
It is odd that you see the nose of the plane go to the left in a gust, and you feel nothing , but feel a random force when the nose returns to it’s original position.One other thing is that I set the forces % from 1 to 40, and with a 2 knot wind get sometimes a 40% force feedback, the same as with a 20 knot wind.
Therefore I have different profiles for calm and strong wind conditions ,
Ivo -
AuthorPosts