Forum Replies Created
-
AuthorPosts
-
08/07/2024 at 08:17 #3861
Diego Bürgin
KeymasterHi Kirk
Open the file:
C:\Program Files (x86)\Brunner Elektronik AG\CLS2Sim\Settings\connection.stx
Search for APP_SWITCH_CUSTOM_AP
Setfalse totrue In CLS2Sim you can now decide more finely grained when the AP mode of the hardware should be active. (AP tab > Custom AP button)
Also, try to fly with “Don’t set pos in AP mode” disabled and see if that improves the situation.Regards
Diego08/07/2024 at 08:10 #3860Diego Bürgin
KeymasterHi
There is only the online help:
https://cls2sim.brunner-innovation.swiss/Units:
If not explicitly labeled, arbitrary internal units of the fw in the devices.
Experimentation required.Kind Regards
Diego12/12/2023 at 09:25 #3669Diego Bürgin
KeymasterHi Folks
We have a release 5.6.5 in the pipeline.
It’s still a WIP, but the issue with the uploads is already fixed.
Please test and give feedback if it works for you too.You can download the test build here:
https://drive.google.com/file/d/1vRGl7cds-misKR9UmayeHXU5sHyq1LGG/view?usp=drive_linkAs always, make a backup of your settings before installing.
Regards
Diego20/06/2023 at 12:22 #3132Diego Bürgin
KeymasterHi all
Diego here.
We are aware of the problem and working on possible solutions.vJoy 2.1.9.1 is working on Windows 11 (for now), but has some highly problematic bugs. (used before CLS2Sim 5.5.0)
vJoy 2.2.1.1 is not working on Windows 11 but is more stable in general.The main problem is that vJoy is not developed actively anymore and as it is a driver, it needs to be signed to allow installation.
Microsoft has made driver signing significantly more complicated and cumbersome than it was two years ago.
We are looking into the possibility of (maybe!) continuing development of vJoy ourselves.
In the meantime we will modify CLS2Sim to allow choosing which vJoy version to use.For those who need to jump back to 5.4.7, here is a link:
https://drive.google.com/file/d/1SzGsGoYb1XK6B68rcqBCt5IM94l74kBi/view?usp=drive_linkIf you can take a minute to fill out this form here, I’d appreciate that greatly!
https://docs.google.com/forms/d/e/1FAIpQLSeTxtMjgOgPwcWplCHp-3Fzi6kVe28Pvu8AseMrNd4MkDZWKA/viewformSorry for the trouble, and thank you all for your patience!
24/02/2023 at 08:54 #3004Diego Bürgin
KeymasterHi Naaman
Please try this version:
https://drive.google.com/file/d/1tx_C4geXdeexIb-35_T2Z7t7a__DcRjE/view?usp=sharing
Run it with the batch file “Log Debug Messages.bat” and upload the log file after you’re done.Regards
Diego03/10/2022 at 10:47 #2880Diego Bürgin
KeymasterHello everyone
a) CLS2Sim not connecting:
We have just now uploaded CLS2Sim build 5.1.23 which fixes the particular problem.b) Memory integrity:
CLS2Sim ships and installs an old FTDI driver (older version for compatibility reasons).
The offending driver installer has been removed.For user with old hardware using a COM-Port:
IF you have Windows 8+, it will automatically install a new version of the driver when the device is plugged in.
If you Windows 7 or older and connections problems, contact us.People with the memory integrity issue will need to uninstall the old driver manually:
Uninstall the following 2 items from “Control Panel” > “Programs and features”Windows Driver Package – FTDI CDM Driver Package – VCP Driver (01/27/2014 2.10.00) – 01/27/2014 2.10.00
Windows Driver Package – FTDI CDM Driver Package – Bus/D2XX Driver (01/27/2014 2.10.00) – 01/27/2014 2.10.00Regards
Diego27/09/2022 at 16:51 #2869Diego Bürgin
KeymasterHello everyone
ftdibus.sys is an old driver that is installed by CLS2Sim, for compatibility with older devices.
If your Brunner device has no COM port, you don’t need this driver and can uninstall it.
However please be aware that each update of CLS2Sim will reinstall the driver.We are aware and working on this problem.
Regards
Diego25/08/2022 at 12:40 #2830Diego Bürgin
KeymasterWe have located the problem and are working on a fix. Will release new version asap.
02/09/2021 at 10:01 #2536Diego Bürgin
KeymasterHi, Diego here.
Please go to https://forum.brunner-innovation.ch/helpdesk/
and open a ticket. I will debug this problem with you.Regards
09/03/2021 at 08:47 #2379Diego Bürgin
KeymasterHi Webmaximus
vJoy since old times had that problem, that on some machines/installations the installation succeeded but the installer hung up after installing the driver.
Kill the installer, restart and check if vJoy is installed. (Always successful in my experience)CLS2Sim 4.29.3 is now out, where the link is fixed.
(Additionally the reconnection interval can now be configured.)Regards
Diego08/03/2021 at 13:30 #2374Diego Bürgin
KeymasterThank you for catching that.
I’ll include it in the hotfix that will be uploaded later today.
Regards
Diego11/11/2020 at 13:32 #2129Diego Bürgin
KeymasterHi Guy.
Sorry for the confusion, I probably explained it wrong.For CLS2Sim 4.26.9 and later:
Open Plane in Plane maker.
Set Elevator trim angles to zero. (See attachment 1)
Save plane.Go to CLS2Sim trim settings.
Disable Hardware trim
Enable Trim compensation for elevator.
(see attachment 2)Regards
DiegoAttachments:
You must be logged in to view attached files.12/10/2020 at 10:57 #2089Diego Bürgin
KeymasterHi Eliottk
In CLS2Sim, go to profile manager.
Select the profile you want to edit on the left.
Open the Buttons tab in the center area.
There the coolie hat is by default configured to trim.
Just set the corresponding actions to “Not bound”.
Press OK on the bottom right and your good.Regards
Diego06/10/2020 at 17:49 #2080Diego Bürgin
KeymasterHi Bruno
Probably the turbulence feature in the effects tab.
Try deactivating that and see if it stops.
If it’s that, lower the max turbulence force,
or increase the axis centering forces via adjustments in the forces tab, eg set forces to be higher at lower airspeeds.Regards
Diego05/10/2020 at 15:38 #2077Diego Bürgin
KeymasterThanks, happy to hear that!
One more bug crossed of the list.
I’ll put the changes into the next release. -
AuthorPosts