Forum Replies Created
-
Posts
-
Stephen ET AL,
.One of the many features I love about the Brunner Yoke (MKII) is in many planes, C172, TBM900, the Yoke mirrors the movement of the yoke in the Sim. However, this is not the case with the PMDG 737-700 in MSFS2020. The yoke in the Sim moves while in Autopilot but the Brunner does not. A very trusted friend (engineer) made the Boeing Profile for me and posted it on the cloud. If I recall correctly he stated because the Boeing is Hydraulic the yoke should not move. Okay, so is the Sim not functioning correctly? The beauty of feeling every bump of air that affects the plane through the Yoke (and pedals, where applicable) is the whole point of FFB or Control Loaded Devices (IMHO). I would very much appreciate you thoughts, feedback and or suggestions on settings to gain the effect I am after.Bless you all,
Scott
Paul,
Copy the the files from x-plane 11 plug-in not 12. Not sure which ones so I copied all that did not look specific to another APP. Hope that help.
Brunner will have to update CLS2SIM.
Same issues here. What is the NAME of the file from the Plugins I am looking for? I deleted XP11 before installing XP12 but can retrieve the files from the Recycle Bin. Oh, I have the MKII (1st Gen) and the Rudder Pedals. I assume Brunner was simply waiting for XP12 to release before testing it. I know Austin does not come across as a Brunner Fan, which makes no sense to me but whatever, so I don’t blame Brunner for taking a back seat or wait and see position.
Thanks,
Scott
Well, right or wrong it works. I have my MKII USB to PC and Ethernet to Rudder Pedals. Rudder Pedals are USB to PC.
Hey Andy. Sorry for the late response. I don’t come here often because there does not seem to be much activity. Either the majority of Brunner Customers are very savvy and don’t need to come here and share there knowledge or they found other sites more beneficial. I’ll look you up on Discords Thanks.
I would really appreciate it is a content creator would do a video on how they have their MKII and Peddles configured for MSFS2020 to get the maximum effect. My current profile provides good feed back on departure but once in AP mode there is no movement, or very little, at Flight level. In X-Plane the Yoke would move in sync with the Airplanes yoke but I don’t get the same affect in MSFS2020. Is this a SDK issue or how I have it setup? Please feel free to jump in an offer any suggestions you may have. All feedback is much appreciated.
Thanks,
Scott
Rynardt,
Great, well thought out and expressed rebuttal. I could not agree more and thank you for taking the time to share it with us all. I have nothing against Austin but I agree with you completely in that he should not be speaking so flippantly about a product he knows nothing about.
I have the MKII and Rudder Peddles and would love to try your profile. Will it be listed under cloudavionics?
We would also welcome you and your instructors to our Flight Simulation Discord where we focus specifically on the needs of Brunner Product customers. Do stop by and invite your Students and Instructors too. https://discord.gg/t8tdJY
Stefan,
Would you be so kind and create a Step-by-Step installation by product like above for X-Plane and DCS? In the prior version I only had to connect my Rudder to the MKII via Ethernet and the MKII to the PC via USB. in v4.26.3 vJoy is no longer needed but I am required to connect both units to the PC USB and connect the two via Ethernet cable in order for both to work. In the Settings, USB HID device which should be chosen? I have both the MKII and the Rudder Peddles available and you cannot choose both. Lastly, and again in previous versions, I did not have calibrate or map keybinds inside x-plane. Now it seems like I have to set them up which again, seems counter intuitive to previous versions. So, please, post a comprehensive list of instructions for each product noting all the steps required to get the maximum benefit from your hardware. If X-PLANE and DCS are different from MSFS2020 then all the more reason we need your help to get it right. I use ALL THREE programs and want to get them configured correctly for each Sim. Thank you.Strange the last post on this subject was Dec 2018. Has this moved to another location? I am interested in using my MKII and Rudder Peddles with DCS too. Please advise where to find the installation instructions.
Thanks,
Richard,
We welcome you to our Discord where you can drop your profiles into our Profile folder. We have a number of existing profiles available for various aircraft.Please stop by when you have time.
Thanks
ScottFlash, I would love to see pics of you 6DOF setup sometim but for now, where do I find the setup information for configuring my MKII Yoke and Peddles to DCS? I know a Joystick would be a better option but hey, at least I have the yoke. Appreciate all the help you can provide.
Also, I have a Discord Server https://discord.gg/Jy4RjJ called FLIGHT SIMULATION. There a number of Brunner users there and a great place to discuss CLS2SIM and all matters Flt Sim. Please know you’re welcome to come by.
Thanks,
ScottThanks Stefan! Best descriptive outline on how to setup a Brunner Product. Well done! Hope to see you on the Alpha Forum soon.
MrScott8569
My CLS-E MKII Yoke and Rudder works just fine in FS2020 but with NO FFB. I heard one user with a Brunner Joystick got to work with Firmware 444. Since Firmware updates are not posted or sent to users automatically, I submitted a Helpdesk Ticket and this is what I received.
(LINK TO FIRMWARE 456)
and this msg…
————————-
“The hardware works with FS2020Do as follow
Select “Use MS Flight simulator X” in connection Settings
Axis and Buttons must be mapped over USB (in FS2020)
Communication from Simulator to CLS2Sim works (Airspeed)
————————-Excited, I followed the steps in the PDF to install…
…Running the CanOpen I get 3 nodes to update – 1 for the Rudder (Yaw) and 2 for the MKII Yoke (Aileron and Elevator). Update when well. My question is how to connect both to FSX (FS2020 support to come) through CLS2SIM and gain FFB effects from Both devices?
NOTE: The cable configuration in the previous Firmware (442) was Yoke to Rudder (Eithernet) and Rudder to PC (USB) for X-Plane. Now, using Firmware (456) this config only reveals the Rudder in FSX. So my question is how to get both Yoke and Rudder to show up in FSX via CLS2SIM when only the Rudder shows connected. FSX sees both but only the Rudder has FFB.
The issue here is connecting via the “USB HID”. When you have two Brunner Devices connected there is a drop down to select the one you want well, I need both to work so the instructions provided above but Brunner is INCOMPLETE. I get they will not support FS2020 until the SDK is released but knowing I have Both the Yoke and Rudder, these instructions lacked the BASIC information required for them to Communicate with the PC.
To enable both units, I had to plug both USB cables directly from the Units to the PC AND connect the two together via Eithernet Cable. Now Force Feedback works…sort of… but the profiles I have require a lot of tweaking. Oh! And I am getting the following error msg in CLS2SIM.
————–
28.02.2020 at 07:40:14 SIM-Error: Sequence contains no elements
at System.Linq.Enumerable.Max(IEnumerable`1 source)
at .(ClsProfile , Single[] , Dictionary`2 )
at .()
—————
I am sure the error msg means something to Brunner but tells me nothing as to what is wrong with my connections.Sent this reply to the Helpdesk yesterday and this AM I have no reply.
